You are here:
  1. Home
  2. Pumps
  3. Domestic Pumps
  4. Peripheral Pumps
  5. APSm Self-Priming Peripheral Pump
Categories

APSm Self-Priming Peripheral Pump

Application
– Can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
– Suitable for lifting water from the well, sprinkling irrigation in garden, pressure boosting of running water, and supporting equipment etc.

APSm Self-Priming Peripheral Pump Features
– LEO’s APSm Self-Priming Peripheral Pump’s cast iron pump body and support all underwent a special anti-rust treatment.
– Anti-block system is introduced for APSm Self-Priming Peripheral Pump’s impeller;
– Brass impeller
– AISI 304 shaft
– Max. liquid temperature: +40℃
– Max. suction: +9m
– self-priming

APSm Self-Priming Peripheral Pump Motor Features
– Copper winding
– Built-in thermal protector for single phase motor
– F grade insulation is well met for our self-priming pumps.
– Protection class: IPX4
– Max. ambient temperature: +40℃

Technical Data of APSm Self-Priming Peripheral Pump

MODEL POWER Qm3/h 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 3 3.3 3.6 4.2
Single Phase Three Phase (KW) (HP) Q(L/min) 0 5 10 15 20 25 30 35 40 50 55 60 70
APSm37  / 0.37 0.5 H(m) 40 35 28 22 18 12 5 / / / / / /
APSm60 / 0.6 0.8 45 40 32 28 22 18 12 8 5 / / / /
APSm75 / 0.75 1 55 50 42 38 32 28 22 18 12 5 / / /
APSm110 APS110 1.1 1.5 65 60 55 50 45 40 35 30 25 20 15 10 5

APSm Self-Priming Peripheral Pump Hydraulic Performance Curve

Material Table for APSm Self-Priming Peripheral Pump

No. Part Material
1 Screw steel
2 Pump Body HT200
3 Impeller Brass
4 Mechanical seal carbon/ceramic
5 O-ring NBR
6 Support HT200
7 Bearing
8 Rotor
9 Fan cover PP
10 Fan PP
11 Rear cover ZL102
12 Capacitor
13 Terminal box ABS
14 Stator
15 Terminal board PC
16 Non-return Valve NBR
17 Connector HT200