You are here:

APSm-AT Automatic Self-Priming Peripheral Pump

Application
– Can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
– Suitable for lifting water from the well, sprinkling irrigation in garden, pressure boosting of running water, and supporting equipment etc.

APSm-AT Automatic Self-Priming Peripheral Pump Features
– 2-second delayed start after plug into the stocket to avoid potential danger
– caused by electric sparks
– Non-water protection
– Automatical detection if there is coming water from pump inlet.
– Anti-blocking protection
– Operating status display (Powering up/Running/No water)

APSm-AT Automatic Self-Priming Peripheral Pump Motor Features
– C&U bearing
– Copper winding
– Built-in thermal protector for single phase motor
– Insulation class: F
– Protection class: IPX4
– Max. ambient temperature: +40℃

Technical Data of APSm-AT Automatic Self-Priming Peripheral Pump

Model Power Q(mÂł/h) 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0
kW HP Q(l/min) 0 5 10 15 20 25 30 35 40 45 50
APSm-25AT 0.25 0.3 H
(m)
25 22 20 15 10 8 5
APSm-37AT  0.37 0.5 35 30 25 20 15 12 8 5
APSm-60AT  0.6 0.8 40 35 30 25 22 18 15 10 5
APSm-75AT  0.75 1.0 50 45 40 35 30 25 18 15 10 5

APSm-AT Automatic Self-Priming Peripheral Pump Hydraulic Performance Curve

Material Table for APSm-AT Automatic Self-Priming Peripheral Pump

No Part Material
1 Pump cover Brass
2 Impeller Brass
3 Mechanical seal Carbon/Cermaic
4 Pump body HT200
5 Front Plate HT200
6 Bearing
7 Rotor
8 Stator
9 Pressure sensor
10 Cover box ABS
11 Fan cover PP-GF10
12 Fan PP-GF15
13 End plate ZL 102
14 Terminal cover ABS
15 Capacitor
16 Pressure tank Iron
17 Pump head PA66
18 Check-valve spring AISI 304
19 Check valve PPO
20 Sealing ring Rubber
21 Inlet connection HT200