You are here:
  1. Home
  2. Pumps
  3. Domestic Pumps
  4. Peripheral Pumps
  5. AKSm155AE Automatic Self-Priming Peripheral Pump
Categories

AKSm155AE Automatic Self-Priming Peripheral Pump

Application
– Can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
– Suitable for lifting water from the well, sprinkling irrigation in garden, pressure boosting of running water, and supporting equipment etc.

AKSm155AE Automatic Self-Priming Peripheral Pump Features
– Self-priming Peripheral Pump
– Brass impeller
– Brass pump bonnet
– AISI 304 shaft
– 3 second delay of pump start after plugging into the socket to avoid potential danger caused by electric sparks
– Automatic pressure sensor inside
– Automatic switching to small flow control system in condition of small water flow
– Automatic stop in 6 minutes in case of no water inside
– Max. liquid temperature: +40℃
– Max. suction: +8 m
– Liquid PH valve: 6.5- 8.5

AKSm155AE Automatic Self-Priming Peripheral Pump Motor Features
– IE 2 motor for energy saving
– C&U bearing
– Copper winding
– Built-in thermal protector
– Insulation class: F
– Low voltage operation with power design of 180V- 220V/50Hz

Technical Data of AKSm155AE Automatic Self-Priming Peripheral Pump

MODEL POWER Qm3/h 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1
(KW) (HP) Q(L/min) 0 5 10 15 20 25 30 35
AKSm155AAE) 1.1 1.5 H(m) 32 30 26 22 17 12 7 2

AKSm155AE Automatic Self-Priming Peripheral Pump Hydraulic Performance Curve

Material Table of AKSm155AE Automatic Self-Priming Peripheral Pump

No. Part Material
1 Base PP
2 Tank Steel(ST12)
3 Impeller Brass
4 Non-return valve NBR
5 Pump Head Cover PA66
6 Pump Head POM
7 Circuit board
8 Capacitor
9 Terminal box ABS
10 Stator
11 Rear cover ZL102
12 Fan PP
13 Fan cover PP
14 Housing PP
15 Bearing
16 Rotor
17 Mechanical seal carbon/ceramic
18 Pressure Switch
19 Air changer
20 Pump bonnet Brass
21 Pump Body POM