You are here:
  1. Home
  2. Pumps
  3. Domestic Pumps
  4. Jet Pumps
  5. AJm Jet Pump with High Flow
Categories

AJm Jet Pump with High Flow

AJm Jet Pump with High Flow Application
– Our jet pump can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
– The pumps are suitable for lifting water from the well, garden irrigation, pressure boosting of running water, and supporting equipment etc.

Jet Pump Features
– Cast iron pump body and support under special anti-rust treatment.
– Stainless steel impeller.
– AISI 304 shaft.
– Max. liquid temperature: +40℃.
– Max. suction: +9m.

Jet Pump Motor Features
– C&U bearing.
– Motor with copper winding.
– Built-in thermal protector for single phase motor.
– Insulation class: F.
– Protection class: IPX4.
– Max. ambient temperature: +40℃.

Technical Data of AJm Jet Pump with High Flow

MODEL POWER Q(m³/h) 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.8 3 3.3 3.6 3.9
KW HP Q(l/min) 0 5 10 15 20 25 30 35 40 47 50 55 60 65
AJm30 0.3 0.4 H 35 30 26 22.5 20 18 16 14 Ë— Ë— Ë— Ë— Ë— Ë—
AJm45 0.45 0.6 (M) 41 36 32 28 25 22 20 18 Ë— Ë— Ë— Ë— Ë— Ë—
AJm60 0.6 0.8 45 41 37 33.5 31 28.5 26 24 22.5 21 Ë— Ë— Ë— Ë—
AJm75 0.75 1 40 38 36 34.5 33 31.5 30 29 28 27 26 25 24 23
AJm75H 0.75 1 51 47 43 40 37 34.5 32 30 27.5 25 Ë— Ë— Ë— Ë—
AJm90 0.9 1.2 48 46 44 42.5 41 39.5 38 36 35 34 33 32 31 30
AJm90H 0.9 1.2 62 57 53 49 46 43 40 37 35 33 Ë— Ë— Ë— Ë—

AJm Jet Pump Hydraulic Performance Curve

Material Table of AJm Jet Pump:

No. Part Material
1 Pump body HT 200
2 Venturi tube PPO
3 Diffuser PPO
4 Impeller AISI 304
5 Mechanical seal Carbon/Ceramic
6 O-ring NBR
7 Support cover AISI 304
8 Support AISI 304
9 Bearing
10 Rotor
11 Fan cover PP
12 Fan PP
13 Rear cover ZL 102
14 Capacitor
15 Terminal box ABS
16 Terminal board
17 Stator