You are here:
  1. Home
  2. Pumps
  3. Domestic Pumps
  4. Centrifugal Pump
  5. 2ACm Two Stage Centrifugal Pump
Categories

2ACm Two Stage Centrifugal Pump

Centrifugal Pump Application
– Centrifugal pump can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
– Suitable for industry use and urban water supply, pressure boosting for high buildings and fire fighting, garden irrigation, long-distance water transferring, heating ventilation and air controlling, circulation and pressure boosting for cold and hot water, and supporting equipment etc.

Centrifugal Pump Features
– Cast iron pump body and support under special anti-rust treatment.
– AISI 304 shaft.
– Max. liquid temperature: +40℃.
– Max. suction: +8m.

2ACm Two Stage Centrifugal Pump Motor Features
– C&U bearing.
– Motor with cooper winding.
– Built-in thermal protector for single phase motor.
– Insulation class: F.
– Protection class: IPX4.
– Max. ambient temperature: +40℃.

Technical Data of 2ACm Two Stage Centrifugal Pump

MODEL POWER Q(mÂł/h) 0 1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6 6.6 7.2 8.4 9.6 10.8 12 15
Single Phase Three Phase KW HP Q(l/min) 0 20 30 40 50 60 70 80 90 100 110 120 140 160 180 220 250
2ACm75  2AC75 0.75 1 H(m) 45 42.5 40 37 33.5 28.5 23 15 ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗ ˗
2ACm110 2AC110 1.1 1.5 47 46 45 44 43 41.5 40 38 35.5 33 30.5 28 22 ˗ ˗ ˗ ˗
2ACm150 2AC150 1.5 2 57.5 55.5 54.5 53.5 52 50.5 49 47 44.5 41.5 38.5 35 28 20 ˗ ˗ ˗
2ACm150H 2AC150H 1.5 2 63.5 60.5 58.5 56.5 54 51.5 48.5 45 41 37.5 33.5 29 ˗ ˗ ˗ ˗ ˗
˗ 2AC220 2.2 3 65 63 62 61 59.5 58 56 54 51.5 49 46 43 36 28.5 20.5 ˗ ˗
2ACm300H ˗ 3 4 65 ˗ ˗ 62 61 60 59 58 56.5 55 53.5 52.5 48.5 44.5 40 35 21
˗ 2AC300H 3 4 70 ˗ ˗ 67 66 65 64 63 62 61 59.5 59 55.5 52 49 45 33
˗ 2AC400H 4 5.5 82 ˗ ˗ 79.5 78.5 77.5 76.5 75.5 74.5 73.5 72 71 67.5 64.5 61 57 45.5

2ACm Two Stage Centrifugal Pump Hydraulic Performance Curves

Material Table of 2ACm Two Stage Centrifugal Pump

No. Part Material
1 Drain Plug HPb59-1
2 Pump body HT 200
3 Gasket NBR
4 Impeller AISI 304/Brass HT200
5 Bracket Cover AISI 304
6 Mechanical seal Carbon/Ceramic
7 Support HT 200
8 Oil Seal
9 Bearing
10 Rotor
11 Stator
12 Rear cover ZL 102
13 Fan PP
14 Fan Cover PP
15 Terminal Board PC
16 Capacitor
17 Terminal Box ABS