You are here:
FSP Series Submersible Pump
Application
The flexible shaft pump is designed for household water pumping as well as small agricultural irrigation.
Flexible Shaft Pump Features
– The pump body is located at the bottom of the pump. The pump suction is equal to the length of the pipe. It is ideal for replacing other surface pumps which cannot pump water once result in it falls below a certain level.
– Max diameter of the pump is 42mm. The water pump can be used in wells whose diameter is more than 50mm.
– This pump is provided with excellent anti freezing functions. When the pump is powered off, there is no water inside the pump body and the pipe, so the pump body or pipe shall be free of any cracks when used in cold weather.
– Apply to water solid content (Quality estimation): â€1%.
– Water PH: 6.5-8.5
– Chlorine ion content in water: †400mg/L
– Max. ambient Temperature: +40°C
Configuration
– Copper wire motor with protector
– High quality stator
– IP54
Technical Data of Flexible Shaft Pump
| Model | Power | Q(mÂł/h) | 0.3 | 0.7 | 0.95 | 1.3 | 1.5 | ||
| kW | HP | Hz | Q(l/min) | 5 | 11.6 | 15.8 | 21.6 | 25 | |
| FSP750-25Â | 0.75 | 1 | 50/60 | H(m) | 81.3 | 50.1 | 31.2 | 10 | 5 |
Flexible Shaft Pump Hydraulic Performance Curves
Mounting Dimension
Materials Table of Flexible Shaft Pump
| No | Part | Material | 12 | Fan | PP |
| 1 | Front end cover | HT200 | 13 | Fan cover | Q235 |
| 2 | Oil seal | NBR | 14 | Tee | Brass |
| 3 | Bearing | GCr15 | 15 | External pipe | PP |
| 4 | Rotor | 16 | Hose clamp | 304 | |
| 5 | Cover box | ABS | 17 | Hose clamp | 304 |
| 6 | Capacitor | 18 | Bearing sheath | Q235 | |
| 7 | Cover lid | ABS | 19 | Component of soft shaft | |
| 8 | Stator | 20 | Internal pipe | PP | |
| 9 | Outgoing line | 21 | Component of pump head | ||
| 10 | Rear end cover | HT200 | 22 | Support | Q235 |
| 11 | VD type sealing ring | 23 | Rail | Q235 |
