- Home
- Pumps
- Domestic Pumps
- Domestic lifting station
- Domestic lifting station
- Pumps (130)
- Commercial Pumps (40)
- Domestic Pumps (90)
- Borehole Pump (24)
- Centrifugal Pump (13)
- Domestic lifting station (1)
- Engine Pump (10)
- Fountain Pump (1)
- FSP Series Submersible Pump (1)
- Garden Jet Pump (2)
- Garden Submersible Pump (5)
- Garden Submersible Pump Stainless Steel (4)
- Jet Pumps (4)
- Peripheral Pumps (13)
- Pool Pump (2)
- Pressure Booster Pump (3)
- Submersible Pump (2)
- Submersible Stainless Steel (5)
Domestic lifting station
Application
– Domestic lifting station, as a lifting station, is suitable for pumping of wastewater off place in private dwellings and basement where wastewater cannot be led directly to the sewer by means of a natural downward slope.
– Domestic lifting station is typically used for:
– Renovation of offices or other commercial buildings.
– Wall-mounted toilets in basements below sewer level.
– Washing machines & dish washers.
– Toilet, wash basins, bathtubs and cabinet showers in the bathrooms which are far away from the main soil pipe so that a natural slope cannot be established.
Domestic lifting station Features
– Compact and slim for easy installation.
– Automatic start and stop.
– Top quality air switch and carbon filter from Germany.
– Circuit board with time delay function and low voltage protection.
– Low noise.
– New blade and support with better cutting performance.
– Suitable for sewage water containing toilet paper and faeces with cutting blade.
Operating Conditions for Domestic lifting station
– Max. liquid temperature: 50℃.
– Max. ambient temperature: 35℃.
– PH value: 4 – 10
– The pump must not be used for strong chemicals or solvents.
Technical Data of Domestic lifting station
| MODEL | POWER | Q(m³/h) | 0 | 2.1 | 3.9 | 5.1 | 6.3 | 6.9 | 7.5 |
| Single Phase | W | Q(l/min) | 0 | 35 | 65 | 85 | 105 | 115 | 125 |
| WC600AÂ | 600 | H(m) | 9.2 | 8.5 | 7.5 | 6.5 | 5.5 | 4.5 | 3.5 |
Domestic lifting station Hydraulic Performance Curves

Material Table of Domestic lifting station

| No. | Part | Material | No. | Part | Material |
| 1 | Outlet | EPDM | 13 | Upper Cover | ZL 102 |
| 2 | Connector | PP | 14 | Rotor | |
| 3 | 3-Way | PP | 15 | Stator | |
| 4 | Cover | PP | 16 | Bearing Seat | ZL 102 |
| 5 | Outlet Cover | ABS | 17 | Stator Shield | ZG 304 |
| 6 | Motor Cover | ABS | 18 | Impeller | PPO |
| 7 | Air Switch | 19 | Cutting Blade | AISI 304 | |
| 8 | Capacitor | 20 | Stirrer | PPO | |
| 9 | Tank Cover | ABS | 21 | Water Tank | ABS |
| 10 | Pump Body | PP | 22 | Outlet | NBR |
| 11 | Cutting Ring | AISI 304 | 23 | Feed Pipe | EPDM |
| 12 | Circuit Board |












