You are here:
0.5HP SPm Submersible Peripheral Pump
Application
– Can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
– Suitable for lifting water from the well, sprinkling irrigation in garden, pressure boosting of running water, and supporting equipment etc.
5HP SPm Submersible Peripheral Pump Features:
– Special anti-rust treatment for cast iron pump body and support
– Max. liquid temperature: +35 â
– Max. immersion depth: 5m
– Liquid PH value: 6.5 – 8
– Maximum sand content: 0.1%
– Maximum solid diameter: 0.2mm
5HP SPm Submersible Peripheral Pump Motor Features:
– Copper winding
– Insulation class: F
– Protection class: IPX8
Technical Data of 5HP SPm Submersible Peripheral Pump:
| MODEL | POWER | QïŒm3/hïŒ | 0 | 0.5 | 1 | 1.5 | 2 | 2.26 | |
| (KW) | (HP) | Q(L/min) | 0 | 5 | 10 | 15 | 20 | 25 | |
| SPm37 | 0.37 | 0.5 | HïŒm) | 42 | 35 | 24.5 | 14 | 4.5 | 0.5 |
5HP SPm Submersible Peripheral Pump Hydraulic performance Curves
Material Table of 5HP SPm Submersible Peripheral Pump
| No. | Part | Material |
| 1 | Casing cover | HT200 |
| 2 | Impeller | Brass |
| 3 | Mechanical seal | carbon/ceramic |
| 4 | Pump body | HT200 |
| 5 | Lowing bearing seat | ZL102 |
| 6 | Oil seal | |
| 7 | Rotor | |
| 8 | Top cover | HT200 |
| 9 | Capacitor | |
| 10 | O-ring | NBR |
| 11 | Up bearing seat | HT200 |
| 12 | Barrel | AISI304 |
| 13 | Screw |
