You are here:
AQm Peripheral Pump
Application
– Can be used to transfer clean water or other liquids similar to water in physical and chemical properties.
– Suitable for lifting water from the well, sprinkling irrigation in garden, pressure boosting of running water, and supporting equipment etc.
AQm Peripheral Pump Features
– Special anti-rust treatment is introduced for AQm Peripheral Pump’s cast iron pump body and support
– Brass impeller is installed on our booster pump.
– AISI 304 shaft
– Max. liquid temperature: +40℃
– Max. suction: +8 m
AQm Peripheral Pump Motor Features
– C&U bearing
– Copper winding
– Built-in thermal protector for single phase motor
– Insulation class: F
– Protection class: IPX4
– Max. ambient temperature: +40℃
Technical Data of AQm Peripheral Pump
| MODEL | POWER | Q（m³/h） | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 3 | ||
| KW | HP | Q（l/min） | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | ||
| AQm37 | 0.37 | 0.5 | H(m) | 40 | 35 | 30 | 25 | 20 | 15 | 10 | 5 | 2 | / | |
| AQm60 | 0.6 | 0.8 | 60 | 55 | 50 | 40 | 35 | 30 | 25 | 20 | 10 | 5 | ||
| AQm75 | 0.75 | 1 | 75 | 70 | 60 | 50 | 45 | 35 | 28 | 22 | 15 | 5 | ||
Hydraulic Performance Curve for AQm Peripheral Pump
Material Table of AQm Peripheral Pump
| No. | Part | Material |
| 1 | Pump Body | HT200 |
| 2 | Impeller | Brass |
| 3 | Mechanical seal | carbon/ceramic |
| 4 | O-ring | NBR |
| 5 | Support | HT200 |
| 6 | Bearing | |
| 7 | Rotor | |
| 8 | Fan cover | 08F |
| 9 | Fan | PP |
| 10 | Rear cover | ZL102 |
| 11 | Capacitor | |
| 12 | Terminal box | ABS |
| 13 | Terminal board | PC |
| 14 | Stator | |
| 15 | Filling plug | Hpb59-1 |
